Hybrid Lipid Nanocapsules: A Robust Platform for mRNA Delivery.

The success of the mRNA vaccine against COVID-19 has garnered significant interest in the development of mRNA therapeutics against other diseases, but there remains a strong need for a stable and versatile delivery platform for these therapeutics. In this study, we report on a family of robust hybrid lipid nanocapsules (hLNCs) for the delivery of mRNA. The hLNCs are composed of kolliphore HS15, labrafac lipophile WL1349, 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE), and a conjugate of oleic acid (OA) and polyethylenimines of varying size (PEI─0.8, 1.8, and 25 kDa). They are prepared by a solvent-free, temperature-phase inversion method, yielding an average size of ∼40 nm and a particle distribution index (PDI) < 0.2. We demonstrate that the PDI remains <0.2 over a wide pH range and in a wide range of medium. We further show that the PDI and the functionality of mRNA condensed on the particles are robust to drying in a sugar glass and subsequent rehydration. Finally, we demonstrate that mRNA-loaded hLNCs yield reasonable transfection in vitro and in vivo settings.

Microneedle patch-based enzyme-linked immunosorbent assay to quantify protein biomarkers of tuberculosis.

There is a clinical need for differential diagnosis of the latent versus active stages of tuberculosis (TB) disease by a simple-to-administer test. Alpha-crystallin (Acr) and early secretory antigenic target-6 (ESAT-6) are protein biomarkers associated with the latent and active stages of TB, respectively, and could be used for differential diagnosis. We therefore developed a microneedle patch (MNP) designed for application to the skin to quantify Acr and ESAT-6 in dermal interstitial fluid by enzyme-linked immunosorbent assay (ELISA). We fabricated mechanically strong microneedles made of polystyrene and coated them with capture antibodies against Acr and ESAT-6. We then optimized assay sensitivity to achieve a limit of detection of 750 pg/ml and 3,020 pg/ml for Acr and ESAT-6, respectively. This study demonstrates the feasibility of an MNP-based ELISA for differential diagnosis of latent TB disease.

The promise of microneedle technologies for drug delivery.

Microneedle (MN) technologies offer the opportunity to improve patient access and target delivery of drugs and vaccines to specific tissues. When in the form of skin patches, MNs can be administered by personnel with minimal training, or could be self-administered by patients, which can improve access to medication, especially those usually requiring injection. Because MNs are small (usually sub-millimetre), they can be used for precise tissue targeting. MN patches have been extensively studied to administer vaccines and drugs in preclinical work as well as in multiple clinical trials. When formulated with biodegradable polymer, MNs can enable long-acting therapies by slowly releasing drug as the MNs biodegrade. Targeted drug delivery by hollow MNs has resulted in FDA-approved products that are able to inject vaccines to skin-resident immune cells to improve immune response and to target specific parts of the eye (e.g., suprachoroidal space) for increased efficacy and avoidance of side effects in other parts of the eye. Cosmetic products based on MN technologies are already in widespread use, mostly as anti-aging agents. With extensive research coupled with FDA-approved products, MN technology promises to continue is growth in research leading to products that can benefit patients.

Bacillus subtilis engineered for topical delivery of an antifungal agent.

Fungal skin infections are a common condition affecting 20-25 percent of the world population. While these conditions are treatable with regular application of an antifungal medication, we sought to develop a more convenient, longer-lasting topical antifungal platform that could increase patient adherence to treatment regimens by using Bacillus subtilis, a naturally antifungal bacteria found on the skin, for drug production and delivery. In this study, we engineered B. subtilis for increased production of the antifungal lipopeptide iturin A by overexpression of the pleiotropic regulator DegQ. The engineered strain had an over 200% increase in iturin A production as detected by HPLC, accompanied by slower growth but the same terminal cell density as determined by absorbance measurements of liquid culture. In an in vitro antifungal assay, we found that despite its higher iturin A production, the engineered strain was less effective at reducing the growth of a plug of the pathogenic fungus Trichophyton mentagrophytes on an agar plate compared to the parent strain. The reduced efficacy of the engineered strain may be explained by its reduced growth rate, which highlights the need to address trade-offs between titers (e.g. measured drug production) and other figures of merit (e.g. growth rate) during metabolic engineering.

Modulation of hair growth by topical drug delivery enhanced by STAR particles.

Topical treatments to modulate hair growth are generally limited by low drug bioavailability due to poor skin permeability. Here, we studied the use of STAR particles, which are millimeter-sized ceramic particles with protruding microneedles, to form micropores in the skin to increase skin permeability to hair growth-modulating drugs. STAR particle design and fabrication were optimized, and the resulting STAR particles were shown to reduce lag time and increase skin permeability to minoxidil and acyclovir by more than three-fold compared to no treatment in pig skin ex vivo. In rats, STAR particles also improved topical delivery of minoxidil and acyclovir, which resulted in an increase or a decrease in the number, length and/or thickness of hairs and/or the number of anagen-phase hair follicles after minoxidil or acyclovir treatment, respectively. Clinical exam and histological evaluation showed no evidence of skin irritation or other adverse effects of the treatments. We conclude that STAR particles can increase topical delivery of minoxidil and acyclovir to improve modulation of hair growth promotion and inhibition, respectively.

Assessing the risk of a clinically significant infection from a Microneedle Array Patch (MAP) product.

Microneedle Array Patches (MAPs) are an emerging dosage form that creates transient micron-sized disruptions in the outermost physical skin barrier, the stratum corneum, to facilitate delivery of active pharmaceutical ingredients to the underlying tissue. Numerous MAP products are proposed and there is significant clinical potential in priority areas such as vaccination. However, since their inception scientists have hypothesized about the risk of a clinically significant MAP-induced infection. Safety data from two major Phase 3 clinical trials involving hundreds of participants, who in total received tens of thousands of MAP applications, does not identify any clinically significant infections. However, the incumbent data set is not extensive enough to make definitive generalizable conclusions. A comprehensive assessment of the infection risk is therefore advised for MAP products, and this should be informed by clinical and pre-clinical data, theoretical analysis and informed opinions. In this article, a group of key stakeholders identify some of the key product- and patient-specific factors that may contribute to the risk of infection from a MAP product and provide expert opinions in the context of guidance from regulatory authorities. Considerations that are particularly pertinent to the MAP dosage form include the specifications of the finished product (e.g. microbial specification), it's design features, the setting for administration, the skill of the administrator, the anatomical application site, the target population and the clinical context. These factors, and others discussed in this article, provide a platform for the development of MAP risk assessments and a stimulus for early and open dialogue between developers, regulatory authorities and other key stakeholders, to expedite and promote development of safe and effective MAP products.

Tolerability, acceptability, and reproducibility of topical STAR particles in human subjects.

Topical delivery to treat dermatological disease is constrained by low skin permeability to most drugs due to the stratum corneum barrier. STAR particles containing microneedle protrusions can be topically applied on the skin to create micropores that dramatically increase skin permeability, even to water-soluble compounds and macromolecules. This study addresses the tolerability, acceptability, and reproducibility of STAR particles rubbed on the skin at multiple pressures and after multiple applications to human subjects. One-time STAR particle application at pressures between 40 and 80 kPa showed that skin microporation and erythema directly correlated with increased pressure, and 83% of subjects reported STAR particles to be comfortable at all pressures. Repeated application of STAR particles for 10 consecutive days at 80 kPa showed that skin microporation (~0.5% of skin area), erythema (low-to-moderate), and comfort with self-administration (75%) were similar over the course of the study. Comfort of sensations associated with STAR particles increased from 58% to 71% during the study, and familiarity with STAR particles increased from 12.5% to 50% of subjects reporting STAR particle application not feeling different from other skin products. This study demonstrates that topically applied STAR particles were well tolerated and highly acceptable after application at various pressures and repeated daily use. These findings further suggest that STAR particles offer a safe and reliable platform to enhance cutaneous drug delivery.

Hepatitis B vaccine delivered by microneedle patch: Immunogenicity in mice and rhesus macaques.

Vaccination against hepatitis B using a dissolving microneedle patch (dMNP) could increase access to the birth dose by reducing expertise needed for vaccine administration, refrigerated storage, and safe disposal of biohazardous sharps waste. In this study, we developed a dMNP to administer hepatitis B surface antigen (HBsAg) adjuvant-free monovalent vaccine (AFV) at doses of 5 µg, 10 µg, and 20 µg, and compared its immunogenicity to vaccination with 10 µg of standard monovalent HBsAg delivered by intramuscular (IM) injection either in an AFV format or as aluminum-adjuvanted vaccine (AAV). Vaccination was performed on a three dose schedule of 0, 3, and 9 weeks in mice and 0, 4, and 24 weeks in rhesus macaques. Vaccination by dMNP induced protective levels of anti-HBs antibody responses (≥10 mIU/ml) in mice and rhesus macaques at all three HBsAg doses studied. HBsAg delivered by dMNP induced higher anti-HBsAg antibody (anti-HBs) responses than the 10 µg IM AFV, but lower responses than 10 µg IM AAV, in mice and rhesus macaques. HBsAg-specific CD4+ and CD8+ T cell responses were detected in all vaccine groups. Furthermore, we analyzed differential gene expression profiles related to each vaccine delivery group and found that tissue stress, T cell receptor signaling, and NFκB signaling pathways were activated in all groups. These results suggest that HBsAg delivered by dMNP, IM AFV, and IM AAV have similar signaling pathways to induce innate and adaptive immune responses. We further demonstrated that dMNP was stable at room temperature (20 °C-25 °C) for 6 months, maintaining 67 ± 6 % HBsAg potency. This study provides evidence that delivery of 10 µg (birth dose) AFV by dMNP induced protective levels of antibody responses in mice and rhesus macaques. The dMNPs developed in this study could be used to improve hepatitis B birth dose vaccination coverage levels in resource limited regions to achieve and maintain hepatitis B elimination.

Sweat induction using Pilocarpine microneedle patches for sweat testing in healthy adults.

BACKGROUND: The sweat test using pilocarpine iontophoresis remains the gold standard for diagnosing cystic fibrosis, but access and reliability are limited by specialized equipment and insufficient sweat volume collected from infants and young children. These shortcomings lead to delayed diagnosis, limited point-of-care applications, and inadequate monitoring capabilities. METHODS: We created a skin patch with dissolvable microneedles (MNs) containing pilocarpine that eliminates the equipment and complexity of iontophoresis. Upon pressing the patch to skin, the MNs dissolve in skin to release pilocarpine for sweat induction. We conducted a non-randomized pilot trial among healthy adults (clinicaltrials.gov, NCT04732195) with pilocarpine and placebo MN patches on one forearm and iontophoresis on the other forearm, followed by sweat collection using Macroduct collectors. Sweat output and sweat chloride concentration were measured. Subjects were monitored for discomfort and skin erythema. RESULTS: Fifty paired sweat tests were conducted in 16 male and 34 female healthy adults. MN patches delivered similar amounts of pilocarpine into skin (1.1 ± 0.4 mg) and induced equivalent sweat output (41.2 ± 25.0 mg) compared to iontophoresis (1.2 ± 0.7 mg and 43.8 ± 32.3 mg respectively). Subjects tolerated the procedure well, with little or no pain, and only mild transient erythema. Sweat chloride concentration measurements in sweat induced by MN patches (31.2 ± 13.4 mmol/L) were higher compared to iontophoresis (24.0 ± 13.2 mmol/L). Possible physiological, methodological, and artifactual causes of this difference are discussed. CONCLUSIONS: Pilocarpine MN patches present a promising alternative to iontophoresis to enable increased access to sweat testing for in-clinic and point-of-care applications.

Suprachoroidal Delivery in Rats and Guinea Pigs Using a High-Precision Microneedle Injector.

Purpose: Methods of injection into the suprachoroidal space (SCS) have been developed for larger animals and humans, but reliable administration to the SCS of rodents remains challenging given their substantially smaller eyes. Here, we developed microneedle (MN)-based injectors for SCS delivery in rats and guinea pigs. Methods: We optimized key design features, including MN size and tip characteristics, MN hub design, and eye stabilization, to maximize injection reliability. Performance of the injection technique was characterized in rats (n = 13) and guinea pigs (n = 3) in vivo using fundoscopy and histological examinations to validate targeted SCS delivery. Results: To enable SCS injection across the thin rodent sclera, the injector featured an ultrasmall, hollow MN measuring 160 µm in length for rats and 260 µm for guinea pigs. To control MN interaction with the scleral surface, we incorporated a three-dimensional (3D) printed needle hub to restrict scleral deformation at the injection site. A MN tip outer diameter of 110 µm and bevel angle of 55° optimized insertion without leakage. Additionally, a 3D printed probe was used to secure the eye by applying gentle vacuum. Injection by this technique took 1 minute to perform, was conducted without an operating microscope, and yielded a 100% success rate (19 of 19) of SCS delivery determined by fundoscopy and histology. A 7-day safety study revealed no notable adverse ocular effects. Conclusions: We conclude that this simple, targeted, and minimally invasive injection technique can enable SCS injection in rats and guinea pigs. Translational Relevance: This MN injector for rats and guinea pigs will expand and expedite preclinical investigations involving SCS delivery.

Interrogating Encapsulated Protein Structure within Metal-Organic Frameworks at Elevated Temperature.

Encapsulating biomacromolecules within metal-organic frameworks (MOFs) can confer thermostability to entrapped guests. It has been hypothesized that the confinement of guest molecules within a rigid MOF scaffold results in heightened stability of the guests, but no direct evidence of this mechanism has been shown. Here, we present a novel analytical method using small-angle X-ray scattering (SAXS) to solve the structure of bovine serum albumin (BSA) while encapsulated within two zeolitic imidazolate frameworks (ZIF-67 and ZIF-8). Our approach comprises subtracting the scaled SAXS spectrum of the ZIF from that of the biocomposite BSA@ZIF to determine the radius of gyration of encapsulated BSA through Guinier, Kratky, and pair distance distribution function analyses. While native BSA exposed to 70 °C became denatured, in situ SAXS analysis showed that encapsulated BSA retained its size and folded state at 70 °C when encapsulated within a ZIF scaffold, suggesting that entrapment within MOF cavities inhibited protein unfolding and thus denaturation. This method of SAXS analysis not only provides insight into biomolecular stabilization in MOFs but may also offer a new approach to study the structure of other conformationally labile molecules in rigid matrices.

Enhanced immune responses to vaccine antigens in the corneal stroma.

To examine the widely accepted dogma that the eye is an immune-privileged organ that can suppress antigen immunogenicity, we explored systemic immune responses to a model vaccine antigen (tetanus toxoid) delivered to six compartments of the rodent eye (ocular surface, corneal stroma, anterior chamber, subconjunctival space, suprachoroidal space, vitreous body). We discovered that antigens delivered to corneal stroma induced enhanced, rather than suppressed, antigen-specific immune responses, which were 18- to 30-fold greater than conventional intramuscular injection and comparable to intramuscular vaccination with alum adjuvant. Systemic immune responses to antigen delivered to the other ocular compartments were much weaker. The enhanced systemic immune responses after intrastromal injection were related to a sequence of events involving the formation of an antigen "depot" in the avascular stroma, infiltration of antigen-presenting cells, up-regulation of MHC class II and costimulatory molecules CD80/CD86, and induction of lymphangiogenesis in the corneal stroma facilitating sustained presentation of antigen to the lymphatic system. These enhanced immune responses in corneal stroma suggest new approaches to medical interventions for ocular immune diseases and vaccination methods.

Microneedle patch tattoos.

Medical tattoos provide medical information, guide radiotherapy, and improve cosmetic outcomes of medical interventions. These tattoos are administered by repeated needle injection that causes pain, bleeding, and risk of infection, which limit more widespread use. Here, we developed single-use microneedle (MN) patches to deposit tattoos in the skin in a simple, rapid, painless, and bloodless way without biohazardous sharps waste. MN patch tattoos were designed with numbers, letters, symbols, environmentally responsive inks, and QR codes. Colored tattoos, and tattoos only visible with ultraviolet illumination for increased privacy, were developed and retained in the skin for at least one year. These MN patch tattoos recorded medical conditions such as diabetic medical alerts and vaccination status, responded to biophysical cues for possible physiological monitoring, and encoded complex personal health information. MN patches may increase safety and access to medical tattoos for improved fiducial marking, medical information storage, physiological monitoring, and cosmetic outcomes.

Microneedle Patches Loaded with Nanovesicles for Glucose Transporter-Mediated Insulin Delivery.

Glucose-responsive insulin delivery systems that mimic insulin secretion activity in the pancreas show great potential to improve clinical therapeutic outcomes for people with type 1 and advanced type 2 diabetes. Here, we report a glucose-responsive insulin delivery microneedle (MN) array patch that is loaded with red blood cell (RBC) vesicles or liposome nanoparticles containing glucose transporters (GLUTs) bound with glucosamine-modified insulin (Glu-Insulin). In hyperglycemic conditions, high concentrations of glucose in interstitial fluid can replace Glu-Insulin via a competitive interaction with GLUT, leading to a quick release of Glu-Insulin and subsequent regulation of blood glucose (BG) levels in vivo. To prolong the effective glucose-responsive insulin release from MNs, additional free Glu-Insulin, which serves as "stored insulin", is loaded after RBC vesicles or liposome nanoparticles bound with Glu-Insulin. In the streptozotocin (STZ)-induced type 1 diabetic mouse model, this smart GLUT-based insulin patch can effectively control BG levels without causing hypoglycemia.

Six-month sustained delivery of anti-VEGF from in-situ forming hydrogel in the suprachoroidal space.

Patients with wet age-related macular degeneration (AMD) require intravitreal injections of bevacizumab (Bev) or other drugs, often on a monthly basis, which is a burden on the healthcare system. Here, we developed an in-situ forming hydrogel comprised of Bev and hyaluronic acid (HA) crosslinked with poly(ethylene glycol) diacrylate for slow release of Bev after injection into the suprachoroidal space (SCS) of the eye using a microneedle. Liquid Bev formulations were cleared from SCS within 5 days, even when formulated with high viscosity, unless Bev was conjugated to a high molecular-weight HA (2.6 MDa), which delayed clearance until 1 month. To extend release to 6 months, we synthesized in-situ forming Bev-HA hydrogel initially as a low-viscosity mixture suitable for injection and flow in the SCS to cover a large area extending to the posterior pole of the eye where the macula is located in humans. Within 1 h after injection, Bev and HA were crosslinked, which retained Bev for slow release as the hydrogel biodegraded. In vivo studies in the rabbit eye reported Bev release for >6 months, depending on gel formulation and Bev assay. The in-situ forming Bev-HA hydrogel was well tolerated, as assessed by clinical exam, fundus imaging, histological analysis, and intraocular pressure measurement. We conclude that Bev released from an in-situ forming hydrogel may enable long-acting treatments of AMD and other posterior ocular indications.

Study protocol for a phase 1/2, single-centre, double-blind, double-dummy, randomized, active-controlled, age de-escalation trial to assess the safety, tolerability and immunogenicity of a measles and rubella vaccine delivered by a microneedle patch in healthy adults (18 to 40 years), measles and rubella vaccine-primed toddlers (15 to 18 months) and measles and rubella vaccine-naïve infants (9 to 10 months) in The Gambia [Measles and Rubella Vaccine Microneedle Patch Phase 1/2 Age De-escalation Trial].

BACKGROUND: New strategies to increase measles and rubella vaccine coverage, particularly in low- and middle-income countries, are needed if elimination goals are to be achieved. With this regard, measles and rubella vaccine microneedle patches (MRV-MNP), in which the vaccine is embedded in dissolving microneedles, offer several potential advantages over subcutaneous delivery. These include ease of administration, increased thermostability, an absence of sharps waste, reduced overall costs and pain-free administration. This trial will provide the first clinical trial data on MRV-MNP use and the first clinical vaccine trial of MNP technology in children and infants. METHODS: This is a phase 1/2, randomized, active-controlled, double-blind, double-dummy, age de-escalation trial. Based on the defined eligibility criteria for the trial, including screening laboratory investigations, 45 adults [18-40 years] followed by 120 toddlers [15-18 months] and 120 infants [9-10 months] will be enrolled in series. To allow double-blinding, participants will receive either the MRV-MNP and a placebo (0.9% sodium chloride) subcutaneous (SC) injection or a placebo MNP and the MRV by SC injection (MRV-SC). Local and systemic adverse event data will be collected for 14 days following study product administration. Safety laboratories will be repeated on day 7 and, in the adult cohort alone, on day 14. Unsolicited adverse events including serious adverse events will be collected until the final study visit for each participant on day 180. Measles and rubella serum neutralizing antibodies will be measured at baseline, on day 42 and on day 180. Cohort progression will be dependent on review of the unblinded safety data by an independent data monitoring committee. DISCUSSION: This trial will provide the first clinical data on the use of a MNP to deliver the MRV and the first data on the use of MNPs in a paediatric population. It will guide future product development decisions for what may be a key technology for future measles and rubella elimination. TRIAL REGISTRATION: Pan-African Clinical Trials Registry 202008836432905 . CLINICALTRIALS: gov NCT04394689.

Clearing away barriers to oral drug delivery.

Ingestible devices have the potential to clear away barriers to oral delivery of biologics to improve drug bioavailability.

Effect of Surface Interactions on Microsphere Loading in Dissolving Microneedle Patches.

Microneedle (MN) patches enable simple self-administration of drugs via the skin. In this study, we sought to deliver drug-loaded microspheres (MSs) using MN patches and found that the poly(lactic-co-glycolic acid) (PLGA) MSs failed to localize in the MN tips during fabrication, thereby decreasing their delivered dose and delivery efficiency into skin. We determined that surface interactions between the hydrophobic MSs and the poly(dimethylsiloxane) (PDMS) mold caused MSs to adhere to the mold surface during casting in aqueous formulations, with hydrophobic interactions largely responsible for adhesion. Further studies with polystyrene MSs that similarly carry a negative charge like the PLGA MSs demonstrated both repulsive electrostatic interactions as well as adhesive hydrophobic interactions. Reducing hydrophobic interactions by addition of a surfactant or modifying mold surface properties increased MS loading into MN tips and delivery into porcine skin ex vivo by 3-fold. We conclude that surface interactions affect the loading of hydrophobic MSs into MN patches during aqueous fabrication procedures and that their modulation with the surfactant can increase loading and delivery efficiency.

Core-shell microneedle patch for six-month controlled-release contraceptive delivery.

There is a tremendous need for simple-to-administer, long-acting contraception, which can increase access to improved family planning. Microneedle (MN) patches enable simple self-administration and have previously been formulated for 1-2 months' controlled release of contraceptive hormone using monolithic polymer/drug MN designs having first-order release kinetics. To achieve zero-order release, we developed a novel core-shell MN patch where the shell acts as a rate-controlling membrane to delay release of a contraceptive hormone, levonorgestrel (LNG), for 6 months. In this approach, LNG was encapsulated in a poly(lactide-co-glycolide) (PLGA) core surrounded by a poly(l-lactide) (PLLA) shell and a poly(D,L-lactide) (PLA) cap that were fabricated by sequential casting into a MN mold. Upon application to skin, the core-shell MNs utilized an effervescent interface to separate from the patch backing within 1 min. The core-shell design limited the initial 24 h burst release of LNG to 5.8 ± 0.5% and achieved roughly zero-order LNG release for 6.2 ± 0.1 months in vitro. A monolithic MN patch formulated with the same LNG and PLGA core, but without the rate-controlling PLLA shell and PLA cap had a larger LNG burst release of 22.6 ± 2.0% and achieved LNG release for just 2.1 ± 0.2 months. This study provides the first core-shell MN patch for controlled months-long drug release and supports the development of long-acting contraception using a simple-to-administer, twice-per-year MN patch.